Production guides · Meme Plugins · 27 October 2026
Use sidechain compression by placing a compressor on the sound you want to reduce and feeding a separate trigger to its detector. For kick-triggered bass ducking, the bass is processed while the kick tells the compressor when to reduce it. Check that routing before changing threshold, attack or release.
If the ordinary compressor controls are unfamiliar, start with the first-compressor setup. This guide focuses on the relationship between trigger and processed sound.
1. Draw the two paths
For the kick-and-bass example, there are two separate jobs:
- Audible bass path: bass → compressor’s main audio input → mix.
- Control path: kick → compressor’s external sidechain detector.
The kick can still play through its normal mix path. Selecting it as a trigger does not mean the kick must become part of the bass audio output.
FabFilter’s sidechain documentation distinguishes internal audio detection from an external input and describes its trigger-audition control. Host routing is a separate step: choosing External in the plugin is not enough if the DAW is sending no trigger.
2. Prove that the detector hears the intended event
Play the kick and bass together. Select the kick route in your DAW’s documented sidechain input, then enable external detection in the compressor where required. Use detector metering or its audition function if available. Turn audition off before judging the processed mix.
Lower threshold temporarily until reduction is easy to recognize. Confirm it follows the kick events rather than only the bass notes. Then return to a useful amount. If nothing happens, check the selected source, send level and routing point before adding more processing.
3. Set the amount for a musical reason
Choose whether you want a brief opening for the kick, obvious rhythmic pumping, or something between them. Adjust threshold and ratio while listening to the bass in context. A large gain-reduction reading is not proof that kick and bass now have separate roles.
If both parts still compete throughout their notes, examine arrangement, register and note length as well. Sidechain compression cannot decide which instrument should provide the sustained low end.
Example: compare two release choices
Imagine a 120-BPM passage with quarter-note kicks 500 milliseconds apart and a sustained bass note. This is a hypothetical exercise, not a measured session. Keep the trigger, threshold, ratio and attack unchanged while comparing two release settings, such as 80 and 250 milliseconds.
- Shorter candidate: listen for a quick bass return. Does that help the groove, or create a distracting change within the note?
- Longer candidate: listen for a smoother or more obvious swell. Is the bass still being pulled down when the next musical event needs it?
- Full phrase: check another bass note and any gap where the kick stops. Keep the behavior that serves both sections.
These times are comparison points, not prescriptions or exact promises about recovery. Detector shape and compressor design matter; listen to the actual envelope.
4. Separate detector filtering from tonal EQ
If the processor offers sidechain filtering, it changes what its detector responds to. It does not automatically apply that same EQ to the bass output. Audition the detector when available, change one filter at a time, and then listen to the actual mix again.
A normal broadband compressor can reduce the whole bass signal even when a filtered trigger caused the reduction. Use a processor designed for a narrower task if you specifically need frequency-selective ducking.
5. Check the comparison and export
Compare with bypass using the level-matching workflow. Keep the routing that the export will actually use and reopen the rendered file. Check that silent or muted trigger arrangements behave as intended in your host rather than assuming every mute control taps the same point.
Sidechain questions
Must the trigger be audible?
Not necessarily. Some setups use a separate control signal. Follow the DAW’s routing so that hiding it from the mix does not also remove it from the detector.
Can this improve vocal clarity?
A vocal can trigger reduction on a competing part, but first identify what masks the words. Use modest, purposeful control instead of making the entire accompaniment pump by default.
Before adding more ducking, check the musical roles of kick and bass. A change to note length, envelope or register may create the space you need; use sidechain reduction for the remaining timed interaction.