MEME PLUGINS / THE LOW END

AUDIO POPE · DOOMER.vst · v1.0.0

Kick & Bass Mixer.

Two parts. A little breathing room.
Hear what a level change, a low shelf or kick-led ducking does to your low end.

LOCAL AUDIO ONLYNO ACCOUNT48 kHz / 24-bit WAV

Start with a pair of stems.

Use separate kick and bass exports with the same song start. Keep their leading silence. Or try our original four-bar example.

Loading the mixer. If this remains visible, open this page in a current browser with JavaScript and Web Audio enabled.

01

Kick

No kick loaded.

02

Bass

No bass loaded.

Delay adds silence before a stem; it never cuts the front. Both exports start at timeline 0. Up to 120 seconds and 40 MiB per file; mono or stereo. WAV is the safest input. Other formats depend on your browser.

MAKE SOME SPACE

Shape the relationship.

There is no correct crossover for every track.
Change one thing, then compare.

The kick reduces both bass channels together. The trigger follows the raw kick before its level and EQ.

Time constants: about 63% of a step per stated time. A shorter release lets the bass return sooner.

A broad cut below a 100 Hz shelf midpoint. This is a tonal choice, not a frequency split.

Bypass the shelves to keep the tone and use ducking alone. Filters can change phase as well as level.

Load both stems or the synthetic example.

LISTEN TO THE DIFFERENCE

One clock. Two versions.

NOT RENDERED
Kick, bass and actual bass gain reduction on a common timelineLoad both stems and render to see their timing and the measured gain-reduction envelope.
Kick in amber · bass in lilac · gain reduction in mint. Time starts at zero.
Your settings, export duration and safety pad will appear here.

Playback stopped.

A keeps the same delays, faders and output pad, with EQ and ducking bypassed. RMS matching only turns down the louder version; it is not a LUFS or perceptual loudness match. Both versions keep playing in sync while you switch, with a 20 ms crossfade. Selection edges have 5 ms audition-only fades. Monitor, A/B, matching and selection do not change either WAV.

TAKE IT BACK TO YOUR SESSION

Keep the bass. Check the pair.

Full common timeline · 48,000 Hz · 24-bit PCM WAV · no dither.
Bass keeps its channel count; the pair uses stereo if either input is stereo.

Bass includes its fader, optional shelf, ducking, output trim and the shared safety pad. The pair adds the processed kick. Both start at zero, include all leading silence and the longest stem, plus 1 second of filter decay when a shelf is active. No normalization to a target loudness, limiter, beat detection or tempo stretch. The −1 dBFS safety ceiling is for sample peaks; intersample peaks can differ. Your source files stay unchanged.

A SMALL RITE. A PRACTICAL HABIT.

Make room, then make a decision.

  1. Align the song starts. Export the two parts from the same DAW start. Use a start delay only when you need it. This tool does not align transients automatically.
  2. Balance before processing. Turn off ducking and listen to the relative levels. A quieter bass or a shorter kick might be enough.
  3. Try a small dip. Begin with 3–6 dB maximum ducking, 5 ms attack and 180 ms release. These are example settings, not a rule. Render, switch A/B, then adjust the release to the groove.
  4. Check the context. Listen with the rest of your arrangement in your DAW. Overlapping frequencies alone do not mean a problem. Different notes, timing or sound choices may make more space than processing.

Worked example: a kick and a held low note

The original demo is four bars at 120 BPM: a mono sine-sweep kick every half second and a stereo bass built from a fundamental plus two harmonics. Both begin at zero. Load it, keep EQ off, and render at 6 dB maximum reduction, 5 ms attack and 180 ms release. The mint curve shows the reduction actually applied to both bass channels. Switch to A to hear the same levels without that dip. Then try 400 ms release: the dip carries further into the next note. Neither is a universal improvement; choose the groove you want.

Limits and privacy

This is a two-stem listening aid, not a stem separator, DAW, mastering service or mix-quality score. The browser resamples decoded audio to 48 kHz. Lossy codecs can add timing padding. Shelves append a fixed 1 second decay allowance, not an infinite tail. Long or loud inputs need memory and may fail on a phone. The component has no uploads, microphone access, analytics, external fonts or model calls. The surrounding website can have its own services; check its privacy policy separately.

Read the guides: Give kick and bass separate roles · Use sidechain compression.

How this version works and primary references

It uses a pre-fader, pre-EQ linked peak detector relative to the kick's peak. Activity scales from −40 dB relative to that peak up to 0 dB. The chosen maximum sets the reduction ceiling, smoothed in dB with attack and release time constants. Silent kick means no ducking. This custom detector is not an emulation of a named compressor.

Web Audio decoding and resampling · W3C shelf filter equations · Ableton manual: sidechain compression.